Dust CollectionBrochure PDF
Hammond Roto-Finish Independent DusKolectors™ solve the dust and dirt problem for isolated machines which can not be connected to a central dust collecting system or where no central system is available. Perfect for restricted spaces, the DusKolector™ draws the dirty air inside itself where the heavier particles are deposited in a dirt container. The air then goes through filters, which remove the finer particles, and the filtered air is then returned to the room. There is no waste of energy exhausting heated or cooled air to the outside of the building.
Depending on the application requirements many DusKolectors™ can be customized for best use. A Hopper Base is also available for any “55” model. It has a 34 cu. ft. cap., with sliding door and 30” high x 43” wide clearance for wheelbarrow unloading. Please contact our sales department for specific details.
Cyclone Model (DK)
The Cyclone (DK) models range between 500 and 800 CFM. These DK models incorporate the centrifugal precipitation and gravitation principle. The heavier particles are deposited in the dirt container. The finer particles are captured in the bag(s). Each bag a zipper in the bottom for dust removal.
Cabinet Model (FDK)
The cabinet model is rated at 700 CFM. It is compact and suitable for light or intermittent dust collecting applications. The cabinet model is recommended for pedestal grinders or small abrasive belt grinders.
Cabinet Model (CDK)
The Hammond CDK model features the unique combination of being both a Cyclone and a cartridge DusKolector™ – all in one compact package!
Less Floor Space
Extended Cartridge Life
Improved Pleated Cartridge Cleaning Cycle
Wide Range of Applications